Answering A Call; Communication In The Hands-Free Mode; Communication In The Press-To-Talk Mode - Aiphone IS SERIES Operation Manual

Answering a call

The maximum duration of communication is preset in the
System setting. (It can be set to a maximum of 10 minutes.)
1
Answer the call in one of the following ways.

■ Communication in the hands-free mode

(Available when "COMMUNICATION METHOD" is set
to "HF" in the "INITIAL SETTING")
<When called in from a sub station>
1)
Press TALK momentarily.
After a beep, you can communicate in the hands-
free mode.
*1: When talking:
When listening to the caller:
2) When you have fi nished the communication, press
OFF .
Communication will end.
You can communicate in the press-to-talk mode by the
*
following operation even when "HF" is set (e.g., when
it is noisy around you).
• TALK for a few seconds while being
Press and hold
called. (Beeps twice and [PRIVACY] disappears
from the display.)
• TALK for more than one second
Press and hold
while communicating. (Beeps once and [PRIVACY]
disappears from the display.)
<When you received a direct voice call from
another master station>
You can talk back to it. If you press and hold TALK for
more than one second, it changes to the press-to-talk
mode. (Beeps once and [PRIVACY] disappears from
the display.)
22
*1
(Lit)
(Off)

■ Communication in the press-to-talk mode

(Available when "COMMUNICATION METHOD" is set
to "PTT" in the "INITIAL SETTING")
<When called in from a sub station>
1)
Press TALK momentarily.
After a beep, you can communicate in the press-to-
talk mode.
2)
Press and hold TALK to talk and release to listen to
the caller.
(When talking)
Lit
3) When you have fi nished the communication, press
OFF .
Communication will end.
<When you received a direct voice call from
another master station>
Press and hold TALK to talk with and release to listen
to the caller.
(When listening to the caller)
Off