Problem
Conditioner not rinsed
in, w compartment for
additives is filled with
water.
The door cannot be
opened when the wash-
ing machine is switched
on.
Washing is heavily
creased.
Possible cause
Conditioner insert in the
compartment for additives
is not correctly attached or
is blocked.
Door locked.
There has been a power cut.
(All indicators are off.)
For safety reasons, the door
remains locked for approx. 4
to 10 minutes.
Possibly too much washing
was loaded.
Remedy
Clean the detergent drawer,
insert the conditioner insert
firmly.
Wait until
indicator
(DOOR) is lit green.
The programme will continue
when the power cut is over.
To remove washing:
If water can be seen in the
appliance, before opening
the door, first drain off the
water. (See section "Carrying
out an emergency drain".)
Observe maximum loads.
21