Clock Functions - AEG BP5003021 User Manual

Display
1 Timer
2 Heating Up / Residual heat indicator
3 Water tank (selected models only)
4 Core temperature sensor (selected
models only)
5 Door lock (selected models only)
6 hr / min
7

Clock functions

Buttons
Button
,
Heat-up / Residual heat indicator
If you activate an oven function, the bars in the display come on one by one. The bars
show that the oven temperature increases or decrease.
CLOCK FUNCTIONS
SYMBOL
Press again and again to switch between the clock functions.
Function
CLOCK
MINUS, PLUS
MINUTE MINDER
TEMPERATURE
FUNCTION
MINUTE MINDER
TIME OF DAY
DURATION
END
7
7
To set the clock function.
To set a value for time
To set the minute minder. To switch ON/OFF
light in oven cavity, hold button more than 3
seconds
To check temperature inside the oven cavity.
To check the Core Temperature Sensor tem-
perature, when is connected (if applicable).
Use only when the oven function is set.
Use to set a countdown time. This function has no effect on
the operation of the oven.
To set, change or control the time of day. Refer to 'Setting the
Use only when the oven function is set to set how long the
Use only when the oven function is set to set when the oven
stops. You can use Duration and End at the same time (Time
delay), if the appliance is to be activate and deactivate auto-
Clock functions
1
6 5
Description
DESCRIPTION
time of day'.
oven operates.
matically later.
11
2 3
4