Advantech CP-150 User Manual page 34

the peripheral slots have logical numbers 2~5. The connectors in logical slot 1 are
designated as 1-P1, 1-P2, and 1-P3 from the bottom up.
Nomenclature for connectors in the other slots is similar, such as 2-P1 and 2-P2.
Connector P1 on the system slot is a keyed connector providing a 32-bit
CompactPCI™ bus between the system slot and the peripheral slot. Connector P2 on
the system slot is an un-keyed connector providing a 64-bit CompactPCI™ bus
between the system slot and the peripheral slots. Connector P3 on the system slot
is open for user definition.
Please check appendix A for the pin assignment for all the connectors on the
backplane.
Table 3-1 : MIC-3800 System to peripheral slot signal assignment.
System Slot (Logical Slot 1)
CLK0
AD31
REQ0#
GNT0#
System Slot (Logical Slot 1)
CLK1
AD30
REQ1#
GNT1#
System Slot (Logical Slot 1)
CLK2
AD29
REQ2#
GNT2#
System Slot (Logical Slot 1)
CLK3
AD28
REQ3#
GNT3#
System Slot (Logical Slot 1)
CLK4
AD27
REQ4#
GNT4#
Peripheral Slot (Logical Slot 2)
P1:D6 CLK
P1:E6 IDSEL
P1:A6 REQ#
P1:E5 GNT#
Peripheral Slot (Logical Slot 3)
P2:A1 CLK
P1:A7 IDSEL
P2:C1 REQ#
P2:D1 GNT#
Peripheral Slot (Logical Slot 4)
P2:A2 CLK
P1:B7 IDSEL
P2:E2 REQ#
P2:D2 GNT#
Peripheral Slot (Logical Slot 5)
P2:B2 CLK
P1:C7 IDSEL
P2:E2 REQ#
P2:C3 GNT#
Peripheral Slot (Logical Slot 6)
P2:A3 CLK
P1:E7 IDSEL
P2:D3 REQ#
P2:E3 GNT#
CP-150 User Manual --- Page 25
P1:D6
P1:B9
P1:A6
P1:E5
P1:D6
P1:B9
P1:A6
P1:E5
P1:D6
P1:B9
P1:A6
P1:E5
P1:D6
P1:B9
P1:A6
P1:E5
P1:D6
P1:B9
P1:A6
P1:E5