External Cleaning; Prolonged Periods Of Non-Operation; Frost Precautions; Moving The Machine - Electrolux ESL 614 Instruction Book

External cleaning

Clean the external surfaces of the machine and control
panel with a damp soft cloth. If necessary use only
neutral detergents. Never use abrasive products,
scouring pads or solvent (acetone, trichloroethylene
etc....).
Prolonged periods of non-
operation
If you are not using the machine for any
period of time you are advised to:
1. Unplug the appliance and then turn off the
water;
2. Fill the rinse aid dispenser;
3. Leave the door ajar to prevent the formation of
any unpleasant smells;
4. Leave the inside of the machine clean.

Frost precautions

Avoid placing the machine in a location where the
temperature is below 0°C. If this is unavoidable, empty
the machine, close the appliance door, disconnect the
water inlet pipe and empty it.

Moving the machine

If you have to move the machine (moving
house etc....):
1. Unplug it;
2. Turn the water tap off;
3. Remove the water inlet and discharge hoses;
4. Pull the machine out together with the hoses.
Avoid over tilting the machine during transport.
16
PMC02UK