Configuring S/Pdif Out - Gigabyte G1.Sniper User Manual

5-3-2 Configuring S/PDIF Out

The S/PDIF Out jacks can transmit audio signals to an external decoder for decoding to get the best
(Note 1)
audio quality.
1. Connecting a S/PDIF Out Cable:
S/PDIF Coaxial Cable
Connect a S/PDIF coaxial cable or a S/PDIF optical cable (either one) to an external decoder for transmitting
the S/PDIF digital audio signals.
2. Configuring S/PDIF Out:
Step 1:
While in the operating system, right-click on the
icon in the notification area and select Playback de-
vices.
Step 2:
On the Playback tab, right-click on SPDIF Out
select Set as Default Device, and then open the Prop-
erties dialog box.
Step 3:
You can go to the Supported Formats tab to select the
formats to be decoded or the Advanced tab to select
the sample rate and bit depth.
(Note 1) The actual locations of the S/PDIF Out connectors may differ by
model.
(Note 2) Select SPDIF Out if you use the S/PDIF Out connector(s) on the
back panel for digital audio output or HDMI screen if you use the
internal S/PDIF Out connector (SPDIF_O) on the motherboard.
S/PDIF Optical Cable
,
(Note 2)
- 117 - Appendix