Gigabyte G1.Sniper User Manual page 41

>>>>> Advanced Clock Control
CPU Clock Drive
Allows you to adjust the amplitude of the CPU and Chipset clock.
Options are: 700mV, 800mV (default), 900mV, 1000mV.
PCI Express Clock Drive
Allows you to adjust the amplitude of the PCI Express and Chipset clock.
Options are: 700mV, 800mV, 900mV (default), 1000mV.
CPU Clock Skew
Allows you to set the CPU clock prior to the Chipset clock.
Options are: 0ps~750ps. (Default: 0ps)
IOH Clock Skew
Allows you to set the North Bridge clock prior to the CPU clock.
Options are: 0ps~750ps. (Default: 0ps)
 Advanced Memory Settings
CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
Extreme Memory Profile (X.M.P.)
System Memory Multiplier
Memory Frequency (Mhz)
Performance Enhance
DRAM Timing Selectable
Profile DDR Voltage
Profile QPI Voltage
x Channel Interleaving
x Rank Interleaving
>>>>> Channel A
 Channel A Timing Settings
 Channel A Turnaround Settings
>>>>> Channel B
 Channel B Timing Settings
 Channel B Turnaround Settings
>>>>> Channel C
 Channel C Timing Settings
 Channel C Turnaround Settings
higf: Move Enter: Select
F5: Previous Values
Extreme Memory Profile (X.M.P.)
Memory Frequency(Mhz)
The settings under the three items above are synchronous to those under the same items on the Ad-
vanced Frequency Settings menu.
Performance Enhance
Allows the system to operate at three different performance levels.
Standard Lets the system operate at its basic performance level.
Turbo Lets the system operate at its good performance level. (Default)
Extreme Lets the system operate at its best performance level.
DRAM Timing Selectable (SPD)
Quick and Expert allows the Channel Interleaving and Rank Interleaving items to be configurable.
Options are: Auto (default), Quick, Expert.
(Note) This item is present only when you install a memory module that supports this feature.
Advanced Memory Settings
[Disabled]
(Note)
(SPD) [Auto]
1333 1333
[Turbo]
(SPD) [Auto]
1.5V
1.15V
6 Auto
4 Auto
[Press Enter]
[Press Enter]
[Press Enter]
[Press Enter]
[Press Enter]
[Press Enter]
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
, System Memory Multiplier (SPD),
(Note)
- 41 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup