Electrolux ESI 66010 User Manual page 25

1. Check that the baskets have been
loaded correctly and that the spray
arms are free to rotate
2. Check that the water tap is opened
3. Press the On/Off button. The
dishwasher must be in setting
mode.
4. Press the button corresponding to
the required programme (see
'Washing programmes' chart).
When a programme has been
selected the corresponding light
will illuminate.
The
indicator light illuminates.
Close the dishwasher door, the
programme starts automatically.
The
indicator light remains illuminated.
1. After having selected the washing
programme, press the delay start
button until the flashing number of
hours for the delay start will
appear in the digital display. The
commencement of the selected
washing programme can be
delayed from 1 to 19 hours.
2. Close the dishwasher door, the
countdown starts automatically and
the number in the display stops
flashing.
3. The countdown will decrease with
steps of 1 hour.
4. The opening of the door will
interrupt the countdown. Close the
door; the countdown will continue
from the point at which it was
interrupted.
5. Once the delay start has elapsed
the programme will start
automatically.
With the delay start function set,
the
indicator light is off. Once the
countdown of the delay start has
elapsed, the washing programme
will start automatically and the
light will illuminate.
To cancel a delay start in progress
you have to reset the dishwasher.
Simultaneously press and hold the
two programme buttons positioned
over the word
programme button lights will
illuminate.
Cancelling a delay start involves
also the cancelling of the washing
programme set. In this case you
have to set the washing
programme again.
electrolux
indicator
, until all the