Table of Contents
Advertisement
TD-VG3511
Click the Delete Selected button to delete the selected entries in the table.
4.13 Bandwidth Control
Choose menu "Bandwidth Control", and then you can configure the Upstream Bandwidth,
Downstream Bandwidth and Bandwidth Control rules for computers in LAN in the next screen.
Enable Bandwidth Control: Check this box so that the Bandwidth Control settings can take
effect.
Line Type: Select the right type for you network connection. If you don't know how to choose,
please ask your ISP for the information.
Total Upstream Bandwidth - The upload speed through the WAN port
Total Downstream Bandwidth - The download speed through the WAN port.
Note:
The values you configure should be less than 100000Kbps. For optimal control of the bandwidth,
please select the right Line Type and ask your ISP for the total bandwidth of the egress and
ingress.
Click Save to make your settings take effect.
Description: This is the information about the rules such as address range.
Upstream Bandwidth: This field displays the max and mix upload bandwidth through the
WAN port, the default is 0.
Downstream Bandwidth: This field displays the max and mix download bandwidth through
the WAN port, the default is 0.
Edit: Click Edit to modify the rule.
To add/modify a Bandwidth Control rule, follow the steps below.
1.
Click Add New shown in Figure 4-84, you will see a new screen shown in Figure 4-85.
2.
Enter the information like the screen shown below.
150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide
Figure 4-84
88
.
Advertisement
Table of Contents
