TP-Link TD-VG3511 User Manual page 33

150mbps wireless n voip adsl2+ modem router
Hide thumbs Also See for TD-VG3511:
Table of Contents

Advertisement

TD-VG3511
150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide
Figure 4-5
Click Advanced, advanced selections for WAN Service Setup can be shown.
MTU (bytes): Maximum Transmission Unit Size. Check this box then you can change the MTU
size. The default MTU value is 1500 Bytes. It is not recommended that you change the default
value unless required by your ISP.
Enable NAT: This technology translates the IP addresses of a local area network to a different
IP address for the Internet. If this Modem Router is hosting your network's connection to the
Internet, please select the check box. If another Router exists in your network, you don't need
to select the option.
Enable Fullcone NAT: It is a type of NAT, if not enabled, the default NAT will act.
Enable SPI Firewall: A SPI firewall enhances network's security. Select the option to use a
firewall, or else without a firewall.
24

Advertisement

Table of Contents
loading

Table of Contents