Table of Contents
Advertisement
TD-VG3511
1.3 Panel Layout
1.3.1 The Front Panel
The Router's LEDs are located on the front panel (View from left to right). They indicate the
device's working status. For details, please refer to LED Explanation.
LED Explanation:
Name
(Power)
(ADSL)
(Internet)
(WLAN)
(WPS)
Slow Flash
Quick Flash
(LAN1-4)
150Mbps Wireless N VoIP ADSL2+ Modem Router User Guide
Figure 1-1
Status
On
The modem router is powered on.
The modem router is off. Please ensure that the power adapter is
Off
connected correctly.
On
ADSL line is synchronized and ready to use.
Flash
The ADSL negotiation is in progress.
ADSL synchronization fails. Please refer to
Off
troubleshooting.
On
The network is available with a successful Internet connection.
Flash
There is data being transmitted or received via the Internet.
There is no successful Internet connection or the modem router is
Off
operating in Bridge mode. Please refer to
troubleshooting.
On
Wireless is enabled but no data is being transmitted.
The modem router is sending or receiving data over the wireless
Flash
network.
Off
Wireless function is disabled.
A wireless device has been successfully added to the network by
On
WPS function.
WPS handshaking is in process and will continue for about 2
minutes. Please press the WPS button on other wireless devices
that you want to add to the network while the LED is flashing.
A wireless device has failed to be added to the network by WPS
function. Please refer to
On
There is a device connected to this LAN port.
Flash
The modem router is sending or receiving data over this LAN port.
Indication
4.6.2 WPS Settings
4
Note 1
for
Note 2
for
for more information.
Advertisement
Table of Contents
