Adsl Setup - Manual Configuration - D-Link DSL-2680 User Manual

Wireless adsl 2+ ethernet router

Hide thumbs Also See for DSL-2680:

Table of Contents

Chapter 3 - Setup

ADSL Setup - Manual Configuration

To configure the Router's basic configuration settings without running the Setup

Wizard, you can access the menus used to configure ADSL Setup, Wireless Setup,

and LAN Setup settings directly from the Setup directory. To access the ADSL Setup

menus for PPPoE/PPPoA, Dynamic IP Address, Static IP Address and Bridge Mode

connections, click on the ADSL Setup link button on the left side of the first menu

that appears when you successfully access the Web manager.

Choose the ADSL connection type used for your service listed under the heading

Manual ADSL Connection Setup, the menu changes according to the type of

connection to be configured. Configure the settings for the chosen Internet

Connection Type. Follow the instructions presented below for the type of connection

used for your ADSL service. The default Internet connection type is PPPoE/PPPoA.

Note: Most users DO NOT need to change configuration settings for the Virtual Circuit at the bottom of this menu. Normally these settings are changed

only for special circumstances and applications. Do not change these unless your ISP has given specific instructions to do so.

For information about these configuration settings, go to "Configure VPI and VCI" on page 27.

D-Link DSL-2680 User Manual

Table of Contents

Show Quick Links

Table of Contents