Electrical Connection - Electrolux ESI 604 Instruction Book

Electrical connection

This appliance must be earthed.
The manufacturer declines any
responsibility should this safety measures
not be observed.
If the plug that is fitted to your appliance is not suitable
for the socket, it must be cut off and the appropriate plug
fitted.
Important
The wires on the mains lead are coloured in accordance
with the following code:
Green and Yellow
Blue
Brown
If you fit your own plug, the colours of the wires in the
mains lead of your appliance may not correspond with
the markings identifying the terminals in your plug.
Proceed as follows:
1. Connect the Green and Yellow (earth) wire to the
terminal in the plug which is marked with the letter
"E" or the earth symbol or coloured green and
yellow.
2. Connect the Blue (neutral) wire to the terminal in the
plug which is marked with the letter "N" or coloured
black.
3. Connect the Brown (live) wire to the terminal in the
plug which is marked with the letter "L" or coloured
red.
The plug moulded onto the lead incorporates a 13amp
BSI362 fuse. Only ASTA or BSI fuses should be used.
The plug must not be used if the fuse cover/carrier is
lost. The cover/carrier is indicated by the coloured insert
at the base of the product.
A replacement cover/carrier must be obtained from your
local Electrolux Service Force Centre.
This appliance complies with the following
E.E.C. Directives:
- 73/23 or 19.2.73 (Low Voltage Directive)
and subsequent modifications;
- 89/336 or 3.5.89 (Electromagnetic
Compatibility Directive) and subsequent
modifications.
-Earth
-Neutral
-Live
CE03
26
PWA02UK