Table of Contents
Advertisement
Make a Device Visible
Other devices with Bluetooth
capabilities can detect your device
and attempt to beam information to
it, establish a partnership, or use a
Bluetooth service.
1. Tap
>
Settings
Settings
>
Connections
2. Tap
Bluetooth
3. Select the
Turn on Bluetooth
check box, select the
device visible to other devices
check box, and then tap OK.
If you do not want your nüvifone to
be visible to other devices, remove
the check mark from the
device visible to other devices
check box.
Add a Bluetooth Device
The first time you use two devices
together, you must "pair" them by
establishing a relationship using a
PIN/passkey.
nüvifone M20 Owner's Manual
>
Advanced
tab.
>
Mode
tab.
Make this
Make this
1. Enable the Bluetooth component
and Find Me/Discoverable/Visible
mode on the device to which
you are connecting. These
settings might be in a Bluetooth,
a Connections, or a Hands-free
menu.
2. On the nüvifone, tap
Settings
>
Advanced Settings
Connections
3. Tap
Bluetooth
Add new
device.
4. Select the device you want to
connect to, and tap Next.
5. Enter the alphanumeric passkey
of the device you want to connect
to, and tap Next. You can find the
passkey in the documentation
that came with the target device.
6. Enter the display name for this
connection.
nOTE: The Bluetooth passkey
for the nüvifone is 1234.
After the initial pairing, the two
Get Connected
>
tab.
>
Devices
tab >
>
Advertisement
Table of Contents
