Advertisement
Bottom Front
Tower Power LED
Power Switch
Connecting Data Cable from the Tower to the System
Note: It is required that the Optical tower V be connected to a port multiplier
compatible eSATA host controller for the system to see all nine optical drives. It is
assumed that the driver for the eSATA host controller is correctly installed.
a.
Using an eSATA to eSATA cable, connect one end to the eSATA port on the
tower and the other to the eSATA port on the system.
Connecting the Power Cable and Turning on the Optical
Tower V
a.
Connect the power cord provided from the wall outlet to the back of the tower.
b.
A main power switch is located on the front of the tower.
Sharing the Optical Drives in Windows
Right click the drive in My Computer, select Sharing, Select Advanced Sharing, share
it and set the permissions (full control).
CONTACT US
www.addonics.com
Phone:
Fax:
Email:
408-573-8580
408-573-8588
http://www.addonics.com/sales/query/
Bottom Back
eSATA Port
Advertisement
