Table of Contents
Advertisement
The table below describes the parameters in this screen. Settings in boldface are the default and suggested
parameter settings.
Parameter
System Time
System Date
System Memory
Extended Memory
VGA Memory
Quiet Boot
Internal Hard Disk
Power on display
LCD Auto Dim
NOTE: The sub-items under each device will not be shown if the device control is set to disable or auto. This is
because the user is not allowed to control the settings in these cases.
Chapter 2
Description
Sets the system time.
Sets the system date.
This field reports the memory size of the system.
Memory size is fixed to 640MB
This field reports the memory size of the
extended memory in the system.
Extended Memory size=Total memory size-1MB
Shows the VGA memory size. The default value
is set to 16MB
Determines if Customer Logo will be displayed or
not; shows Summary Screen is disabled or
enabled.
Enabled: Customer Logo is displayed, and
Summary Screen is disabled.
Disabled: Customer Logo is not displayed, and
Summary Screen is enabled.
Shows the hard disk types and capacity. If there
is no hard disk present or unknown type, "None"
should be shown on this field, otherwise the
capacity must be shown.
Auto: During power process, the system will
detect if any display device is connected on
external video port. If any external display device
is connected, the power on display will be in CRT
(or projector) only mode. Otherwise it will be in
LCD only mode.
Both: Simultaneously enable both the integrated
LCD screen and the system's external video port
(for an external CRT or projector).
Determines if the system will automatically dim
the LCD brightness in order to save power when
AC is not present.
Format/Option
Format: HH:MM:SS
(hour:minute:second) System Time
Format MM/DD/YYYY (month/day/
year)
System Date
16
Option:1/4/8/
/32MB
Enabled
Option:
or Disabled
Auto
Option:
or Both
Enabled
Option:
or Disabled
39
Advertisement
Table of Contents
