Acer TravelMate 6492 Series Service Manual page 60

The table below describes the parameters in this screen. Settings in boldface are the default and suggested
parameter settings.
Parameter
System Time
System Date
System Memory
Extended Memory
Video Memory
Quiet Boot
Network Boot
F12 Boot Menu
D2D Recovery
Note: The sub-items under each device will not be shown if the device control is set to disable or auto. This is
because the user is not allowed to control the settings in these cases.
50
Description
Sets the system time. The hours are
displayed with 24-hour format
Sets the system date
This field reports the memory size of the
system. Memory size is fixed to 640MB
This field reports the memory size of the
extended memory in the system
(Extended Memory size=Total memory
size-1MB)
Shows the VGA memory size
Determines if Customer Logo will be
displayed or not; shows Summary Screen
is disabled or enabled
Enabled: Customer Logo is displayed, and
Summary Screen is disabled
Disabled: Customer Logo is not displayed,
and Summary Screen is enabled
Enables or disables the system boot from
LAN (remote server)
Enables or disables Boot Menu during
POST. Enabled: During quite boot, the
OEM POST screen displays Press
<F12>Change Boot Device
Disabled: During quite boot, the OEM
POST screen does not display Press
<F12>Change Boot Device
Note: This Boot device change is applies to
next boot only.
Enables or disables D2D Recovery
function. The function allows the user to
create a hidden partition on hard disc drive
to store operation system and restore the
system to factory defaults
Format/Option
Format: HH:MM:SS
(hour:minute:second)
Format MM/DD/YYYY
(month/day/year)
Option: Enabled or Disabled
Option: Enabled or Disabled
Option: Disabled or Enabled
Option: Enabled or Disabled
Chapter 2