Power Management - Acer TravelMate 510 Service Manual

Power Management

The Power Management screen contains parameters that are related to
power-saving and power management.
The following table describes the parameters in this screen. Settings in
boldface are the default and suggested parameter settings.
Parameter
Advanced Enables or disables advanced power management (Windows
Power 95 only). See "Power Management" for more information on
Manage-ment power management modes.
Mode
Options: Enabled or Disabled
Turn Off Will blank the display screen after a set amount of inactivity time
Display on the user input devices. This timer will reset when activity
occurs on any keyboard, or pointing device.
Options: Never, 1, 2, 3, 5, 10 or 15 Minutes
Turn Off Hard Will "spin down" the hard disk after a set amount of inactivity on
Disk the disk interface. This timer will reset when activity occurs on
any primary disk interface, or secondary disk interface.
Options: Never, 1, 2, 3, 5,10, 15, 20, 25 or 30 Minutes
System The system will enter into System Standby mode after a set
Standby amout of inactivity time. The timer will be reset once there is
activity in any of the following devices: keyboard, pointing
devices, communication port, floppy and hard disk drives and
bus master requests.
Options: Never, 1, 2, 3, 5, 10, 15, 20, 25, 30, 45 or 60 Minutes
System The system will enter into Hibernation mode after a set amout of
Hibernation inactivity of time. Timer will be reset once there are activity in the
After Standby following devices: Keyboard, pointing devices, communication
port, floppy and hard disks drive and bus master requests.
Options: Never, 1, 2, 3, 5 , 10, 15, 20, 25, 30, 45 or 60 Minutes
40
Description
System Utilities