Mac Address Authentication; Figure 3-42 Displaying 802.1X Port Statistics - Accton Technology 24/48 10/100 Ports + 2GE Management Manual

3
Configuring the Switch
Web – Select Security, 802.1X, Statistics. Select the required port and then click
Query. Click Refresh to update the statistics.
CLI – This example displays the 802.1X statistics for port 4.
Console#show dot1x statistics interface ethernet 1/4
Eth 1/4
Rx: EAPOL
Start
2
Last Last
EAPOLVer EAPOLSrc
1 00-00-E8-98-73-21
Tx: EAPOL
Total Req/Id
2017 1005
Console#

MAC Address Authentication

Some devices connected to switch ports may not be able to support 802.1X
authentication due to hardware or software limitations. This is often true for devices
such as network printers, IP phones, and some wireless access points. The switch
enables network access from these devices to be controlled by authenticating
device MAC addresses with a central RADIUS server.
Note:
MAC authentication, 802.1X, and port security cannot be configured together on
the same port. Only one security mechanism can be applied.
The Network Access feature controls host access to the network by authenticating
its MAC address on the connected switch port. Traffic received from a specific MAC
3-74

Figure 3-42 Displaying 802.1X Port Statistics

EAPOL EAPOL
Logoff Invalid
0 0
EAP EAP
Req/Oth
0
EAPOL EAP
Total Resp/Id
1007 672
4-90
EAP EAP
Resp/Oth LenError
0 0