Diagnostics menu
Entering Diagnostics menu
1.
Turn off the printer.
2.
Press and hold
3.
Turn on the printer.
4.
Release the buttons when Performing Self Test displays.
Available tests
The menus display on the operator panel in the order shown:
Diagnostic menu settings
Registration
Print tests
Hardware tests
Duplex tests (if installed)
Input tray tests
Output bin tests
Base sensor test
Printer setup
EP setup
Event log
Exit Diagnostics
Note: Menus may vary depending on the features and options of the printer.
and
.
See
"Registration" on page
See
"Print tests" on page
See
"Hardware tests" on page
See
"Duplex tests" on page
See
"Input tray tests" on page
See
"Output bin tests" on page
See
"Base sensor test (B. sensor test)" on page
See
"Printer setup" on page
See
"EP setup" on page
See
"Event log" on page
See
"Exit Diagnostics" on page
3-6.
3-7.
3-8.
3-9.
3-10.
3-11.
3-11.
3-12.
3-13.
3-14.
3-15.
Diagnostic aids
3-5