Toner Level Sensor Removal - Dell 2330d - Laser Printer B/W Service Manual

Toner level sensor removal

1.
Open the front access door.
2.
Remove the right side cover. See
3.
Disconnect the toner level sensor cable (A) from the controller board.
4.
Squeeze the lower tabs (B) of the toner level sensor, and push it from its holder.
5.
Remove the toner level sensor through the inside of the printer.
Note: The toner level sensor must be installed properly, or the printer will not function.
4-60
"Right side cover assembly removal" on page
B
4-58.
A