Pioneer HTZ-7 VisionPlus Service Manual page 125

Display
1
2
^
1 CONDITION
Indicates playback settings (condition) are memorized.
2 TITLE
Indicates a title playback.
3 TOTAL
Indicates total playback time of disc side currently playing.
4 LAST MEMO
Indicates that the location on disc where you last stopped watching
is memorized.
5 REMAIN
Indicates remaining playback time.
6 CHP/TRK
Indicates playback of a chapter or track.
7 ANGLE
Indicates multi-angle playback.
8 LFE
LFE lights when the unit is set for Dolby Digital playback and there's
a source channel set for LFE (Low Frequency Effect) reproduction.
During actual playback, [
9 ATT
Lights when the attenuator is ON.
0 L - Ls = C ~ S ! R @ Rs
Set channels light.
3 5 7
4 6 8
& * ( )
] lights.
9 0 = ! $
- ~ @ #
_ +
#
DIGITAL
Indicates Dolby Digital playback is in progress.
$
PRO LOGIC
Indicates Dolby PRO LOGIC playback is in progress.
* When Digital and
Indicates Dolby Digital playback of a Dolby Pro Logic encoded source
is in progress.
% DSP
Lights during DSP mode selection.
^ 96 kHz
Lights during playback of a disc with a sampling frequency of 96kHz.
& Timer ON
Lights during Wake-up Timer setting/operation.
* Wake-up Timer
Lights when the Wake-up Timer is ON, and flashes during Wake-up
Timer operation.
( Sleep Timer
Lights when the Sleep Timer is ON and during Sleep Timer operation.
) Station Reception
Lights during broadcast station reception.
_ Stereo Station Reception
Lights during stereo broadcast station reception.
+ Mono
Lights when the Monaural mode is selected.
HTZ-7, HTZ-C7, HTZ-SW7
%
PRO LOGIC light simultaneously
125