Disassembly - Pioneer HTZ-7 VisionPlus Service Manual

7.2.3 DISASSEMBLY

DVD Center Unit (HTZ-C7)
<< PRECAUTIONS >>
Be sure to disconnect the power cable
from the AC outlet whenever removing
the card flexible cable from the connector
for maintenance, etc. Hold the both sides
of the card flexible cable with both hands
to disconnect the cable straight. (Even if
the power has been switched OFF,
previously charged voltage may remain in
the capacitor, etc. If the electrodes of the
card flexible cable and those of the
connector come in contact by accident, a
malfunction may occur.)
Special tools to be prepared
Hexagon key wrench
(2 mm across flats)
2
5
Side Panel L Assy
Hexagon Key Wrench
Front Alumi
2
Side Skirt L
Front Skirt
3
Disengage the Hooks
1
6
FCC Holder
CN5506
CN5502
MOTHER ASSY
CN5501
HTZ-7, HTZ-C7, HTZ-SW7
4
Hexagon Key Wrench
A
A
7
Disconnect the flexible wiring of
the MOTHER Assy.
CN5501
CN5502
CN5505
CN5506
CN5508 (for FAN Motor)
CN5505
2
CN5508
Side Panel R Assy
1
Top Alumi
Side Skirt R
5
109
2