Front Panel; Guide To Parts And Controls - Sony BDV-E2100 Operating Instructions Manual

Guide to Parts and Controls

For more information, refer to the pages indicated in parentheses.

Front panel

A "/1 (on/standby)
Turns on the unit, or sets it to standby
mode.
B Disc tray (page 26)
C
(N-Mark) (page 31)
Position the NFC-compatible device
near this indication to activate the NFC
function.
D Play operation buttons
Z (open/close)
a) b)
N (play)
b)
x (stop)
a)
VOL +/–
./> (previous/next)
FUNCTION (page 24)
Selects the playback source.
a)
N and VOL + buttons have a tactile dot.
Use the tactile dot as a reference when
operating the unit.
b)
Hold down N on the unit for more than
2 seconds, the built-in sound
demonstration will be played back on the
system. Press x to stop the demonstration.
Note
During the demonstration, the volume
level may be higher than the volume level
you have set.
E
(USB) port (page 28)
(BDV-E6100/BDV-E4100/
BDV-E3100 only) Place your
fingernail in the slot to open the cover.
F
(remote control sensor)
G Front panel display
H LED indicator
White: Lights up when the unit is
turned on.
Blue (for Bluetooth status):
– System is ready for pairing: Flashes
quickly
– During pairing: Flashes quickly
– During connection: Flashes
– Connection is established: Lights up
Slot
BDV-E2100
only
US
13