Parameter List - A&D HV-15KV-WP Instruction Manual

Hv-wp/hw-wp series waterproof digital platform scale
Hide thumbs Also See for HV-15KV-WP:
Table of Contents

Advertisement

15.2. Parameter List

15.2.
15.2.
15.2.
Item
Display
Automatic
f1 0
display
f1 1
OFF
Weighing
f2 0 #
range
f2 1
f3 0 #
f3 1
Unit
f3 2
f3 3
f4 0 #
Baud rate
f4 1
f4 2
f5 0 #
f5 1
f5 2
f5 3
Output
mode
f5 4
f5 5
f6 0 #
f6 1
f6 2
Comparator
f6 3
f6 4
The "#" is factory settings. The "nearly-zero" is within ±4 digits from zero point in the unit of kg.
15. The Function Table
Parameter List
Parameter List
Parameter List
Turns the display OFF automatically.
No automatic display OFF
Automatic display OFF
Selects the way of changing weighing range for HV-WP series.
Automatic range
Manual range using the
Selection of the first unit at the time when the scale turns on.
kg
lb
oz
lb-oz
Transmission rate of the serial interface (RS-232C/ 422/485).
2400bps
4800bps
9600bps
Mode selection for the serial interface (RS-232C/ 422/485).
Stream mode. (Refer to "16.2 Stream Mode")
Command mode. (Refer to "16.3 Command Mode")
Data is output, when the
Auto-print +
When the display becomes a positive stable value without nearly-
zero, the scale outputs the data automatically. Next output can be
performed after the display becomes nearly-zero or a negative value.
Auto-print +/-
When the display becomes a stable value without nearly-zero,
the scale outputs the data automatically. Next output can be
performed after the display becomes nearly-zero.
At each finish of full/dribble batch function, the data is output.
Pressing the
SET
display value.
The scale always compares the display value.
Pressing the
SET
value when not nearly-zero.
The scale always compares the display value when not nearly-
zero.
When the display value becomes stable after pressing the
scale compares the display value. It does not compare on an unstable
condition. If the
SET
Meaning and purpose
switch.
RANGE
switch is pressed.
PRINT
switch, the scale always compares the current
switch, the scale always compares the display
switch is pressed again, the scale stops the comparison.
Page 44
switch, the
SET
HV-WP/HW-WP Series
A
A
A
A
A
A

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents