HANNspree ST221MBB User Manual page 23

Picture Mode: To select picture mode between Standard, Mild, User, and Dynamic. When user is
selected, you can adjust the level of Contrast, Brightness, Colour, Tint, and Sharpness
separately.
Contrast: To adjust contrast of video.
Brightness: To adjust luminance of video.
Colour: To adjust colour.
Tint: To adjust tint level.
Sharpness: To adjust picture sharpness.
Colour Temperature: To select Colour Temperature from Normal, Cool, User, and Warm with
◄►. When User is selected, you can adjust the level of Red, Green, and Blue separately.
Aspect Ratio: To select image size between Full, Zoom, Subtitle, Panorama, Underscan (or
Auto), and Normal with ◄►. You can select "UnderScan" to switch image to full screen when in
HDMI source.
Noise Reduction: To reduce the noise level of connected equipment.
Auto Adjust: Auto adjust to optimize the display position and phase of the picture when the TV
connected to PC. Note that Auto Adjust does only work well with VGA (D-sub 15) input signals.
H-Pos: To adjust the horizontal position of the picture.
V-Pos: To adjust the vertical position of the picture.
Size: To adjust the size of the picture.
Phase: To adjust delay time of phase in order to reduce the noise of picture.
19