Reprogramming Remote Control; Firmware Updates - Panasonic DMP-BD79 Owner's Manual

Reprogramming the
remote control
If you have more than one Panasonic player/
recorder and the remote control operates both
products at once, you will need to change the
remote control code to prevent this occurrence.
( 27, "Remote Control Code")
14
VQT4V11

Firmware updates

Occasionally, Panasonic may release updated
firmware for this unit that may add or improve the
way a feature operates. These updates are
available free of charge.
This unit is capable of checking the firmware
automatically when connected to the Internet via
a broadband connection.
When a new firmware version is available, the
following message is displayed.
New firmware is available.
Please update firmware in Setup.
To update the firmware
Press [HOME]
press the [SETTINGS] button on the remote
control
select "System" and press [OK]
select "Firmware Update" and press [OK]
select "Update Now" and press [OK]
DO NOT DISCONNECT the unit from the AC
power or perform any operation while the update
takes place.
After the firmware is installed, INFO LED and
POWER LED flash 3 times (
reference guide"), and "FIN" will be displayed on
the screen. Unit will restart and the following
screen will be displayed.
The firmware was updated.
Current Version
≥ If downloading on this unit fails or this unit is not
connected to the Internet, then you can download the
latest firmware from the following website and burn it
to a CD-R to update the firmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
To show the firmware version on this unit.
( 27, "Firmware Version Information")
≥ Downloading will require several minutes. It may take
longer or may not work properly depending on the
connection environment.
≥ If you do not want to check for the latest firmware version,
set "Automatic Update Check" to "Off". (
8, "Control
: x.xx
OK
RETURN
27)