Views Of The Drive - LaCie 301076 - DVD+/-RW Drive Slim Design User Manual

LaCie Slim DVD±RW •
User Manual

1.3. Views of the Drive

Front View
1. Disc Tray – Open the tray by pressing the load/eject button,
then place a DVD or CD into the tray with the label facing up.
Close the tray by pushing the load/eject button or pushing the
front part of the tray. This drive has not been designed to ac-
cept media with cartridges.
2. Drive Activity LED
3. Load/Eject Button – Push this button to open the media tray.
4. Emergency Eject Hole –
similar object) and push to eject the tray if the load/eject
button does not work. In normal operation, the eject button
should always be used to unload the tray. If you must use the
emergency eject hole, make sure the drive's power is turned
off and wait until disc rotation has stopped.
Rear View
1. Power Supply Connection –
tional AC adapter. See section
DVD±RW for more information.
2. Hi-Speed USB 2.0 Port –
2.0 Y cable supplied with the drive. See section
Your LaCie Slim DVD±RW
IMPORTANT INFO: You may attach an optional external power
supply (not included) to the power supply connector.
D s H
esign by am ecHt
Insert a straightened paper clip (or
This is where you plug in the op-
2. Connecting Your LaCie Slim
This is where you plug in the USB
2. Connecting
for more information.
Fig. 01
Fig. 02
Foreword
page 8