About Dvd/Cd Available Capacity; Usb Questions & Answers; Data Transfers - LaCie 301076 - DVD+/-RW Drive Slim Design User Manual

Dvd±rw
Hide thumbs Also See for 301076 - DVD+/-RW Drive Slim Design:
Table of Contents

Advertisement

LaCie Slim DVD±RW •
User Manual
4.4. About DVD/CD Available
Capacity
There are important factors to consider when recording video, au-
dio, or data to CD or DVD discs. The DVD media specification pro-
vides for two physical sizes: 4.7" (12cm) and 3.1" (8cm) (both are
.47" (1.2cm) thick). DVD discs are single-sided and can have one
(SL) or two (DL) layers of data.
The amount of data or video that a disc can hold are dependent
upon factors such as the amount of audio and the degree of com-
pression of the data, video or audio.
When media companies reference the amount of data that a disc
can hold, they represent the total amount in terms of gigabytes
(GB), or a billion bytes (1000 x 1000 x 1000 bytes). This number,
though, is not the way in which a computer addresses the data;
to a computer the value is binary and larger than a billion bytes –
1,073,741,824 (1024 x 1024 x 1024 bytes).
4.5. USB Questions & Answers
What Are the Benefits of the USB Interfaces?
✦ Cross-platform: All recent Macs and PCs include USB 2.0
ports.
✦ "Hot Swappable": No need to shut down or restart your com-
puter when adding or removing a USB device. Plug it in and
its ready.
✦ Automatic configuration: Once your device is connected, your
computer recognizes the device and configures the software
(Windows XP, Windows Vista, and Windows 7).
✦ Daisy-Chaining: USB 2.0 ports on your computer support up
to 127 peripherals using hubs.
✦ Easy Installation: One standardized port and plug combina-
tion makes it simple to connect.
Will Hi-Speed USB 2.0 Devices Work on USB 1.1 Hubs
and Vice Versa?
You can use your Hi-Speed USB 2.0 devices with USB 1.1 hubs, but
the peripherals will be limited to USB 1.1 performance levels.
For more information about the USB interface, please visit the LaCie
website:
www.lacie.com/technologies
D
s
H
esign by
am
ecHt
Helpful Technical Information

4.6. Data Transfers

Data transfers are the flow of data that accomplishes a task, usu-
ally related to moving data from storage to computer RAM or be-
tween storage devices. During data transfers, it's best to wait before
launching other applications on the same USB port. Anomalies may
arise with USB controllers that do not conform to OHCI (Open Host
Controller Interface*) standards. LaCie cannot ensure proper opera-
tion when using interface controllers that are not OHCI compliant.
If you encounter a problem with an unsupported peripheral connec-
tors, such as a time lag ("hanging"), proceed as follows:
1. Make sure that the USB cable is connected tightly and securely
on both ends of the cable, from the drive to the computer. If you
are using a USB cable other than the one supplied with your
LaCie drive, check that it is Hi-Speed USB 2.0 certified.
2. Check that the power supply and ground connection are seated
properly.
3. Disconnect your computer's USB cable. Wait 30 seconds. Re-
connect.
TECHNICAL NOTE:
*Controller - This is a component or an elec-
tronic card (referred to in this case as a "controller card") that en-
ables a computer to communicate with or manage certain peripher-
als. An external controller is an expansion card which fills one of the
free slots (i.e. PCI or PCMCIA) inside your PC and which enables
a peripheral (i.e. DVD/RW drive, Hard Drive, scanner, or printer)
to be connected to the computer. If your computer is not equipped
with a USB controller card, you can purchase an external controller
through LaCie. Contact your LaCie reseller or LaCie Technical Sup-
port (section
6. Contacting Customer
page 16
Support) for more information.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Slim

Table of Contents