Table of Contents
Advertisement
Back to Contents Page
System Board
Dell™ Latitude™ D510 Service Manual
Removing the System Board
Installing the System Board
Removing the System Board
CAUTION:
Before performing the following procedures, read the safety instructions in your Product Information Guide.
The system board's BIOS chip contains the Service Tag, which is also visible on a barcode label on the bottom of the computer. The replacement kit for the
system board includes a CD that provides a utility for transferring the Service Tag to the replacement system board.
NOTICE:
Disconnect the power supply and any attached devices from electrical outlets, and remove any installed batteries.
NOTICE:
To prevent damage to components inside your computer, discharge static electricity from your body before you touch any of your computer's
electronic components. You can do so by touching an unpainted metal surface.
1. Follow the instructions in
"Preparing to Work Inside Your
2. Remove the
palm
rest.
3. Remove the
microprocessor thermal-cooling
4. Remove the microprocessor.
5. Remove the speakers.
6. Remove the two M2.5 x 5-mm screws labeled "B".
1 M2.5 x 5-mm screws (2)
2 system board
7. Turn the computer upside down and remove the four M2 x 3-mm screws labeled "B" that secure the system board to the computer base.
Computer."
assembly.
Advertisement
Table of Contents
