Table of Contents
Advertisement
5.
Remove the display panel.
NOTICE:
A strip of copper foil may be present beneath the support bracket on some systems; ensure that you do not tear this foil while removing the
bracket.
6. Remove the M2 x 4-mm screw that secures the support bracket to the top cover.
7. Lift the support bracket out of the top cover, and then remove the display latch.
NOTE:
Ensure that the support bracket is upright when you replace the display latch.
1 top cover
2 M2 x 4-mm screw (1)
3 support bracket
4 display latch
Back to Contents Page
Advertisement
Table of Contents
