3D Assist Mode
(continued)
Menu
OVERLAY
STANDARD
GLAY
COLOR
MKR POSI
0 to 56 (MKR WIDTH 3%
setting)
0 to 37 (MKR WIDTH 2%
setting)
0 to 18 (MKR WIDTH 1%
setting)
(Factory default setting: 0)
MKR WIDTH
3%
2%
1%
54
Setting
Selects overlay or gray display (displays image differences that emphasize the
parallax portion).
[STANDARD] Overlay display
[GLAY]
[COLOR]
• When [COLOR] is selected, [L: RED R: GREEN] is displayed in the menu.
Shifts the vertical line marker in the horizontal direction.
Selects the interval of a vertical line marker.
[3%] Shown at 3 % intervals across the horizontal image width
[2%] Shown at 2 % intervals across the horizontal image width
[1%] Shown at 1 % intervals across the horizontal image width
• Changing [MKR WIDTH] automatically changes the [MKR POSI] setting that is
tied to it.
Underlined values indicate factory defaults.
Description
Gray display (differences display)
Color indicated (differences display)
Edge of SDI1 (L) side image Red
Edge of SDI2 (R) side image Green