2D/3D Assist; Marker - Panasonic BT-LH2170 Operating Instructions Manual

Main Menu
(continued)

2D/3D ASSIST

Setting
2D
3D ASSIST

MARKER

Submenu
MARKER OFF
ON
16:9 OFF
* *
2 3
4:3
13:9
14:9
CNSCO 2.39
CNSCO 2.35
2:1
VISTA
95%
93%
90%
88%
80%
USER 85%
VAR. H. 85% V. 85%
4:3 OFF
* *
2 4
95%
93%
90%
88%
80%
USER 85%
VAR. H. 85% V. 85%
BACK NORMAL
*
2
HALF
BLACK
*
1
This setting is turned [ON] when receiving marker control signals in REMOTE operation. (GPI if set, has priority.)
*
2
These settings are disabled when the GPI (→page 60) function is used to control the marker setting.
*
3
These settings are enabled only for HD and SD signal input when [SD ASPECT] is set to [16:9] aspect ratio mode. (→ 28 page "SD
ASPECT")
*
4
These settings are enabled only for SD signal input when [SD ASPECT] is set to [4:3] aspect ratio mode. (→ 28 page "SD ASPECT")
24
Switches between 2D mode and 3D assist mode.
[2D] Operates in 2D mode.
[3D ASSIST] Operates in 3D assist mode.
When you switch to [3D ASSIST], the input line selection will be force switched to
SDI1 or SDI2.
Setting
Selects whether to enable or disable the marker setting.
*
1
Selects/displays various markers in 16:9 aspect ratio.
[OFF]
[4:3]
[13:9]
[14:9]
[CNSCO 2.39] 2.39:1 marker
[CNSCO 2.35] 2.35:1 marker
[2:1]
[VISTA] VISTA marker
[95%]
[93%]
[90%]
[88%]
[80%]
[USER] An area marker that is adjustable in 1% increments within a range
[VAR.]
Selects/displays the marker type for when the angle of view of the displayed
image is 4:3.
[OFF]
[95%]
[93%]
[90%]
[88%]
[80%]
[USER] An area marker that is adjustable in 1% increments within a range
[VAR.]
Selects the background brightness around the marker.
[NORMAL] Normal background
[HALF]
[BLACK]
Underlined values indicate factory defaults.
Description
Underlined values indicate factory defaults.
Description
No marker display
4:3 marker
13:9 marker
14:9 marker
2:1 marker
95 % area marker
93.1 % area marker (TYPE1)
93 % area marker (TYPE2)
90 % area marker
89.5 % area marker (TYPE1)
88 % area marker (TYPE2)
80 % area marker
of 80 to 100%. However, when the [MARKER TYPE] is [TYPE1],
88% and 93% indicate area markers whose height area 89.5% and
93.1%, respectively.
(The factory default is 85 %.)
This area marker can be varied in 1% increments in the range
between 80 to 100% separately for vertical and horizontal.
(The factory default is 85% for both vertical and horizontal)
No marker display
95 % area marker
93 % area marker
90 % area marker
89 % area marker (TYPE1)
88 % area marker (TYPE2)
80 % area marker
of 80 to 100%. However, when the [MARKER TYPE] is [TYPE1], 88
% indicates an area marker whose height is 89%.
(The factory default is 85 %.)
This area marker can be varied in 1% increments in the range
between 80 to 100% separately for vertical and horizontal.
(The factory default is 85% for both vertical and horizontal)
50% signal level
0 % signal level (black)