Display Setup - Panasonic BT-LH2170 Operating Instructions Manual

Main Menu
(continued)

DISPLAY SETUP

Submenu
WFM/VECTOR
POSITION
VECTOR MODE
VECTOR SCALE
TIME CODE
POSITION
FONT SIZE
MODE SELECT
CLOSED CAPTION
CC TYPE
CAPTION CHANNEL
*
1
Opens the vector display during SDI signal input.
*
2
When the TWO WINDOW function is operating, only SDI1 signals support time code display. As a result, the time code is displayed
at the bottom left of the screen.
*
3
A bright line appears on line 21 when signal input is set to [ON] during video and underscan is enabled.
46
Setting
OFF Switches between WFM/VECTOR waveform and vector display.
WFM Y [WFM Y] - [WFM B] Displays waveforms.
WFM R [VECTOR]
WFM G
WFM B
VECTOR
RT Selects the position for the "WFM/VECTOR" waveform display.
RB [RT] Right Top
LB [RB] Right Bottom
LT [LB] Left Bottom
[LT] Left Top
×1 Enlarges vector waveforms.
×2S [×1] 1x
×2 [×2S] At 1x scale display only waveforms are enlarged to 2x.
×4 [×2] 2x
×8 [×4] 4x
[×8] 8x
75% Determines the scale of vector waveform.
100% [75%]
[100%] Displays it at 100 % scale.
OFF Selects whether to enable or disable time code display
ON
TOP Selects position of time code display.
RIGHT [TOP]
CENTER [RIGHT]
LEFT [CENTER] Bottom center of screen
[LEFT]
SMALL Selects font size of time code display.
LARGE [SMALL] Menu font size
[LARGE] Twice the height and width of menu font size
LTC Selects time code display mode.
VITC [LTC] Displays linear time code.
LUB [VITC] Displays vertical interval time code.
VUB [LUB] Displays user bits included in LTC.
LTC+LUB [VUB] Displays user bits included in VITC.
VITC+VUB [LTC+LUB] Displays [LTC] and [LUB] on two consecutive lines.
[VITC+VUB] Displays [VITC] and [VUB] on two consecutive lines.
OFF Selects whether to enable or disable closed caption display.
ON
CEA-608 (ANC) Selects the closed caption display mode.
CEA-608 (VBI) [CEA-608 (ANC)] Displays data compliant with CEA-608 (ANC).
CEA-608 (708) [CEA-608 (VBI)] Displays data compliant with CEA-608 (VBI).
CEA-708 [CEA-608 (708)] Displays CEA-608 standard data transmitted according to the
OP-42
OP-47 [CEA-708]
[OP-42]
[OP-47]
CC1 Selects the closed caption display channel for CEA-608.
CC2
CC3
CC4
Description
Displays vector waveforms.
*
1
Displays it at 75 % scale.
*
Top center of screen
Bottom right of screen
Bottom left of screen
CEA-708 standard.
Displays data compliant with CEA-708.
Displays OP-42 data.
Displays OP-47 data.
Underlined values indicate factory defaults.
*
1
*
1
*
2
2
*
3