When Connecting To Separately Sold Power Amp; When Connecting The External Video Component And The Display - Pioneer AVH-X8500BHS Owner's Manual

Section
24 Connection

When connecting to separately sold power amp

Rear output Front output
To front output
To rear output
Subwoofer
output
To subwoofer
This product
output
Blue/white
Connect to system control terminal of the
power amp or auto-antenna relay control
terminal (max. 300 mA 12 V DC).
Perform these connections when
using the optional amplifier.
50
En
Power amp
(sold separately)
Power amp
(sold separately)
Power amp
(sold separately)
Connect with RCA cables
(sold separately)
System remote control
Left Right
Subwoofer
Subwoofer
Rear speaker Rear speaker
Front speaker Front speaker
Connection

When connecting the external video component and the display

Audio inputs
(REAR AUDIO INPUT R)
Audio inputs
10 cm (3-7/8 in.)
(REAR AUDIO INPUT L)
RCA connector
This product
Rear audio output
(REAR AUDIO OUT)
! It is necessary to change AV Input in the
system menu when connecting the external
video component.
Refer to Setting AV input on page 41.
This product s rear video output and rear audio
output are for connection of a display to enable
passengers in the rear seats to watch the DVD,
etc.
WARNING
! Never install a rear display in a location that is
visible to the driver while the vehicle is in motion.
External video component
(sold separately)
To video
output
To audio
outputs
RCA cables
Video input
(sold separately)
(REAR VIDEO INPUT)
Rear monitor output
(REAR VIDEO OUTPUT)
Mini pin plug cable
(sold separately) To video
input
To audio
inputs
Display with RCA input
jacks (sold separately)