Loading Paper - Casio 140CR - Cash Register User Manual

Part-1 QUICK START OPERATION
2. Loading Paper Roll And Replacing The Printer's Ink Roll
Mode Switch
CAL
REG
OFF
RF
PGM
1. To load journal paper
!
Remove the printer cover by
lifting up the back.
@
Put a roll of journal paper
into the holder.
#
Cut the leading end of the
roll paper with scissors and
insert the paper into the inlet.
$ l
Press the key until 20 or
30 cm of paper is fed from
the printer.
%
Roll the paper onto the take-
up reel a few turns.
^
Set the left plate of the take-
up reel and place the reel
into the register.
& l
Press the key to take up
any slack in the paper.
E
10
*
Replace the printer cover by
placing the cover's front tab
X
into the register's groove.
Z
2. To remove journal paper
!
Remove the printer cover fol-
lowing the instructions above.
@
Press the
proximately 20cm of the pa-
per is fed from the printer.
#
Cut off the roll paper.
$
Remove the take-up reel
from the printer and take off
the left plate of the reel.
%
Remove the journal paper
from the take-up reel.
^
Cut off the paper left in the
printer and press the
until the remaining paper is
fed out from the printer.
&
Remove the core of the pa-
per.
Options: Roll paper – P-5860
l
key until ap-
l
key
Ink Roll – IR-40
*
Load new paper following the
instructions above, and re-
place the printer cover.
Default printer setting is for
Journal.
To print receipts, please refer to
1-7-3 on page 24 to switch the
printer for Receipt or Journal.
◗ To load receipt paper
!
To use the printer to print re-
ceipts, follow steps 1 through
4 of "To load journal paper".
@
Pass the leading end of the
receipt paper through the
printer cover's paper outlet
and replace the printer cover.
#
Tear off any excess paper.