Brother RH-981A Specifications page 3

Special lapel cutting device
*When sewing straight buttonholes, needle rotates 6 mm in front of the tip of the eyelet buttonhole knife, so
that the seam length for straight buttonholes will be as shown in the table.
*The standard hammers are 5 mm and 7 mm.
*The special lapel cutting device can be used only when the feed bracket is set to the front position.
Specifications
RH-981A-00
RH-981A-01
Eyelet buttonhole
5 – 50 mm
5 – 38 mm
2002.10
Straight buttonhole
5 – 44 mm
5 – 32 mm
RH-981A 3/8