Check The Operation Of The Loaded Camera; Confirm The Shooting Scene And Shooting Mode - Olympus PT-038 - Underwater Housing For FE-230 Instruction Manual

Check the operation of the loaded camera.

After sealing the Case, check that the camera functions normally.
1 Push the POWER button on the Case and confirm that the camera
turns on/off.
2 Turn the mode dial on the Case and confirm that the camera mode
switches properly.
• Check if the correct mode is being switched from the LCD monitor.
3 Press the shutter button on the Case and confirm that the camera
shutter releases.
EN
• Also operate other control buttons on the Case and confirm that the
camera functions properly.
CAUTION:
If the camera does not function properly, reinstall the digital camera following
the procedures of "Check the digital camera." (P.16) of this manual.

Confirm the shooting scene and shooting mode.

When using the Case, the current camera shooting scene and shooting
mode can be confirmed on the camera's LCD monitor.
EN 20
Shooting scene/Shooting mode