Seal The Case; Check The Operation Of The Loaded Camera - Olympus PT-046 Instruction Manual

Seal the Case

1 Close the rear lid of the Case gently.
2 Turn the open/close dial clockwise.
• The Case is sealed when the dial is turned 180 degrees.
En
CAUTION:
• If the open/close dial is not fully turned, the Case will not be sealed. This
will cause water leakage.
• Close the rear lid of the Case so that the lens cap strap doesn't catch. If it
catches, water leaks may result.

Check the operation of the loaded camera

After sealing the Case, check that the camera operations normally.
1 Push the ON/OFF button on the Case and confirm that the camera
turns ON/OFF.
2 Operate the control buttons on the Case and confirm that the camera
functions properly.
3 Press the shutter button on the Case and confirm that the camera
shutter releases.
EN 16
Close