Time Settings - Haier LY22K3CWW2 User Manual

Getting Started
C
Press button to select the item requires adjusting.
D
Press button to adjust the selection item.
E
When you are satisfied with your choice, press the
EXIT button to return to normal viewing or press
MENU button to return to the previous menu.
Display Mode
To set the picture proportion, press
select 4:3/Zoom1/Zoom2/Wide/16:9/Auto. You can
quickly select the desired mode by ARC button on
the remote control.
4:3 mode
Choose 4:3 when you want to view a picture
with an original 4:3 aspect ratio, with gray bars
appearing at both the left and right sides.
16:9 mode
Choose 16:9 when you want to adjust the picture
horizontally, in a linear proportion to fill the entire
screen.
Zoom1
Choose Zoom1 when you want to view the picture
without any alteration. However, the top and
bottom portions of the picture will be cropped.
Zoom2
Choose Zoom2 when you want the picture to be
altered, both vertically extended and cropped.
The picture taking a halfway trade off between
alteration and screen coverage.
Wide
Choose Wide when you want to adjust the picture
in a non-linear proportion, that is, more enlarged
at top sides and no alteration, at bottom side.
Blue Screen
This will select the character background colour.
EN-21 Digital LCD Television Instruction Manual
Note
Recorder
To recorder the DTV program. Details of Recorder are
described in the page of 25, 26.
SCART Input
When you use the SCART2 input ,make sure the input
source is AV or S-VIDEO, and set the SCART INPUT
option.
OSD Time Out
To set how long you want the menus to appear
on-screen. Each press of
select the number of preset minutes, the Time will be
set in sequence: off, 10sec, 15sec, 30sec, 45sec, 60sec.
button to
OSD Transparency
To set the transparency background of OSD, the
transparency will be set in sequence: Off, 25%, 50%,
75%, 100%.
Reset
To recover to the default value.

TIME SETTINGS

Clock
A
B
The Blue Screen function is only available for
ATV mode.
Press MENU button.
Press button to select Time menu, press
button to enter.
button repeatedly to