Page 1
DIGITAL LCD TELEVISION INSTRUCTION MANUAL MODEL: LT26R3A , LT26K3A LY26R3A , LY26K3A LTF32R3A , LTF32K3A LY32R3A , LY32K3A LTF42R3A , LTF42K3A LTF42R3B , LTF42K3B Please read this manual carefully before operating the unit, and keep it for future reference.
P.02 Welcome P.03 Important information About your LCD TV P.06 Get to know your TV P.08 Get to know your remote control Connecting your TV P.09 Preparation of your remote control P.11 Getting Started Setting up P.12 Tuning your TV P.13...
WELCOME Thanks for buying this 26"/32"/42" HD Ready Digital LCD TV. This guide will help you set up and begin using your TV. First, check the contents of your box with the parts checklist below: 26"/32"/42"HD Ready Digital LCD TV...
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. *To avoid electric hazards, it is strongly suggested that the back cover not be opened, as there is no any accessory inside the casing.
Page 6
Unauthorized disassembly of the television The product must be placed on a solid and is prohibited to avoid electric shocks or fire stable surface to avoid collapse. hazards. Contact...
Page 7
Don't use or store inflammable materials Don't place the product in a humid area to near the product to avoid explosion or fire avoid fire hazards. hazards. Never touch the plug when your hand is wet The antenna of the product should be away as this might cause electric shocks.
About your LCD TV GET TO KNOW YOUR TV Front control panel Rear Terminals Control 1. YPbPr input 9. HDMI2 input 17.OPTICAL 2. YPbPr AUDIO input input 3. DVI AUDIO input 11. Common Interface 4. ANTENNA input 12. SCART1 input 5.
Page 9
GET TO KNOW YOUR TV WITH DVD Front control panel Rear Terminals Control 1. YPbPr input 9. HDMI2 input 17.OPTICAL 2. YPbPr AUDIO input input 3. DVI AUDIO input 11. Common Interface 4. ANTENNA input 12.SCART1 input 5. HDMI3 input 13.VGA AUDIO input...
Favourite list button OK button Cursor Mover button Back button (only for USB) Exit Screen Display REPEAT (only for DVD , USB , REC & Timeshift) / CANCEL button Zoom (only for DVD &USB)/ Teletext index(only for STOP STOP TV) / REC index Play / Pause button (only for DVD &USB) / Timeshift...
TV. Tighten the screws on the VGA connectors and connect the audio cable (not supplied) to the audio input socket on the back of the TV. 4.Turn on the power of the TV firstly and then the PC.
Page 12
CONNECT A DVD PLAYER OR VCR TO YOUR TV There are two ways in which you can connect a DVD player or VCR to your TV. Make sure that both the TV and DVD player or VCR are switched off before you connect them.
Please use two AAA 1.5V batteries. Do not mix battery types. Install the batteries at the correct polarities. Do not use rechargeable batteries. If your TV is to be stored for a period of time, remove the batteries from the remote control.
Getting Started Setting up LOCATION You will need to place your TV near your plug socket (so the power cable can comfortably reach) and within reach of your aerial socket or extension lead. CONNECTION 1. Insert your TV aerial lead into the Antenna input at the side of the TV.
Input Source Input Source Input Source to the TV, you will need to tell the TV to display the content from it. Simply press SOURCE which will bring up the source menu in the left corner of the screen, Use the...
5. And then select Storage To, press button to select the position number you want the channel on. Once a channel is located, you can press red button to save it. Press EXIT button to exit. EXIT EXIT SAVE...
, and press OK button to enter. SKIP 1.Press button to select the channel and press blue button to skip the current channel. 2.You can press the blue button to cancel the changes at anytime. GUIDE (Electronic Program Guide)
Please noted that CA modules and smart cards are neither supplied nor optional accessories from us. Warning: switch off your TV before any module is inserted in the Common Interface slot. CI Module Insert Insert the CAM correctly, then Smart Card to the CI slot that is located at the side of the TV.
TV set will be standby. 8 After the download has finished, your TV set will enter burning state and the indicator light is shining. The menu 4 of right appears. The set will be standby when the update is completed.
Press the P+/P- button to select a channel number. HOW to adjust volume Press V+/V- button on the remote control or the side of the TV to adjust the volume level. CH.LIST function Press CH.LIST button on the remote control will display Channel List menu, and then press button to enter.
Mode This will select the picture mode. Select Standard/Mild/User/Vivid according to the program. You can quickly select the desired mode by P .MODE button on the remote control. Colour temperature This will increase or decrease Warm (red) and Cool (blue) colours to suit personal preferences.
Sound Tuning Time Lock Function This will adjust the output of the right and left speakers to obtain the best stereo reproduction for your listening position. Mode This will select the sound mode. Press button to select Standard/Music/Theater/User according to the program.
You can quickly select the desired mode by ARC button on the remote control. 4:3 mode Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio, with gray bars appearing at both the left and right sides.
Page 24
FUNCTION SETTINGS Time Out To s et how long you want the menus to appear on-screen. Each press of button repeatedly to select the number of preset minutes, the Time will be set in sequence: off,10sec,15sec, 30sec,45sec,60sec. Menu OSD T...
< > Press button to adjust the value. Close When the off time has arrived, the TV set will enter into standby mode. On Time 1 Press MENU button. 2 Press button to select Time menu, press button to enter.
Page 26
Sleep The sleep timer automatically shuts off the TV after a preset time (from 5 to 240 minutes). 1 Press the MENU button and then use button to select the Time menu. 2 Press the button and then use button to select the Sleep.
When enter the Tuning menu, Tuner Lock will be on the screen. If you want to operate Tuning menu, you need to enter the Lock menu to set Tuner Lock Off or operate unlock.) Channel NO.
Value is set, when volume is being adjusted, the sound value can not exceed maximum volume value. If current volume is over Max Volume, when lock set menu is set, current volume will become set maximum volume, if current volume is below maximum volume, customer set volume will stay unchanged.
1. Press CH.LIST button on the remote control, will display Channel List menu. 2. Press button to select the channel and press OK button to enter. You can press the EXIT button to cancel the changes at anytime. GUIDE Function Press GUIDE button on the remote control, will display...
(mute) function is very convenient. 1 Press the MUTE button on the remote control and "Mute" type face will display on the lower part of the screen. At this Time, the sound of the TV set is turned off.
. It also provides subtitles for people with hearing difficulties or those who are unfamiliar with the language in which a particular program is being broadcast (cable networks, satellite channels, etc.). Note: The teletext buttons could be working even if there is no teletext signal, but there is no teletext display. Teletext...
Size Pressing the button changes between full screen top half bottom half full screen. This feature is very useful as it magnifies the image making the characters easier to read. Reveal Pressing the button will reveal hidden text.
1) The file code rate should be lower than 300KB/S; 2) Due to the limitation of USB signal transmission distance, it is recommended not to use USB patch cord, in case of using the cord ,make sure that its length is not over 1m;...
Page 34
2.Insert USB equipment into corresponding USB interface 2s after starting the system. 3. After entering the system menu, press on the remote control unit to select the require USB files press “OK” button to confirm the selection and enter the file list relative to the selection. 4. Press on the remote control unit to select the required file, press OK button to enter the selected file.
Page 35
6.Press “ STOP ” to stop playing ,or return to the previous menu, and press “BACK” repeatedly to return to the main menu. NOTE: You can choose the photos or music in different files to play together.
OK to confirm, and then press “PLAY/PAUSE” button to play the pictures. 4. If you want to pause the picture which is being palyed, press the PALY/PAUSE button again. Press ZOOM to magnify the picture. When the picture is enlarged, press “...
Press PREV/NEXT ” to select the last or next music. Press “STOP ” to stop the music being played,when the current interface is the music being played. 4. To return to the main menu just press BACK repeatedly. NOTE: You can enjoy the music and the picture at the same time.
2. Press OK to confirm the selection and enter the movie file list. 3. Press and “OK” button to select the movie you want to play and then press PLAY/PAUSE button to play the movie. Press ZOOM to magnify the picture Press PREV/NEXT ”...
Page 39
PLAY/PAUSE button to play the text . Press PREV/NEXT ” to select the last or next text. 4. To exit the Text mode just press BACK repeatedly. NOTE: You can enjoy the music and the text at the same time.
1. Only have to format when you use the device for record for the first time. 2. The minimum device size for record is 1GB. Provide device formatting function is up to 2TB. The max Multi-Partition is 16 partitions and one is active at a time. 3. Bit rate: Device bit-rate>4.5MB/s REC is safe at HD stream...
When the recorded program is being played, you can not delete it. 2.Press the INDEX button repeatedly , the program will be displayed in the order of program name , channel name, program time , file name and file length.
PLAYING A DVD 1.Press the SOURCE button on the remote control to enter DVD mode. 2.Place the DVD in the disc slot with the DVD label facing away from you and the screen. The disc slot will only take standard-sized DVD.
Page 43
USING THE ZOOM FUNCTION 1.Press the ZOOM button to zoom into the image on screen. You can press it repeatedly to further enlarge the picture. 2.In zoom mode use the buttons to display a different section of the enlarged picture on the screen.
Page 44
If you want to cancel this function, press PROGRAM and move to STOP, then press PLAY/PAUSE. Use A-B to set a section of a DVD to repeat. Press A-B to mark the start point and again to mark the end. The section will begin to be repeated immediately.
Page 45
PLAYING A JPEG CD 1.Insert a JPEG CD in the same way as you would a DVD or Audio CD, with the label facing away from you. 2.The CD will load and a menu of the disc's contents will appear on screen.
1.If the fault can not be repaired using the above guide consult with your local authorized service centre. 2.The TV set must only be repaired by a qualified registered service person. Never attempt to remove the back cover as the TV set has dangerous voltages in side that may cause a fatally or fire.
Base cover (Only for 42” digital LCD TV) Battery (x2) The part specifications of this TV set provided here are for reference only. Differences may occur as product technology is updated. Design and specifications are subject to change without notice.