Safety Cut-Out - Electrolux EHD 72100-X Installation And Operating Instructions Manual

Safety cut-out

Cooking surface
• If after switching on the cooking surface, a heat setting is not set for a
cooking zone within approx. 10 seconds, the cooking surface automati-
cally switches itself off.
• If one or more sensor fields are covered for longer than approx. 10 sec-
onds, e.g. by a pan placed upon it, a signal sounds and the cooking sur-
face switches off automatically.
• If all cooking zones are switched off, the cooking surface automatically
switches itself off after approx. 10 seconds.
Control panel
3
Moisture (e.g. a wet cloth) or liquid boiling over onto the control panel imme-
diately switches all cooking zones off.
Induction cooking zones
• In the case of overheating (e.g. when a saucepan boils dry) the cooking
zone automatically switches itself off.
again, the cooking zone must be set to
• If cookware that is not suitable is used,
ter 2 minutes the indicator for the cooking zone switches itself off.
• If one of the cooking zones is not switched off after a certain time, or if the
heat setting is not modified, the relevant cooking zone switches off auto-
matically.
be set to 0.
Heat setting
v, 1 - 2
3 - 4
5
6 - 9
is displayed. Before being used again, the cooking zone must
Switches off after
6 hours
5 hours
4 hours
1.5 hours
is displayed. Before being used
0
and cooled down.
lights up in the display and af-
17