Displaying the time remaining for a cooking zone
Step
Control panel field
1.
TIMER Select cooking zone
After a few seconds the pilot light flashes more slowly.
Switching off the acoustic signal
Step
Control panel field
1.
Touch
Acoustic signal stops.
Safety cut-out
Cooking surface
• If after switching on the cooking surface, a heat
setting is not set for a cooking zone within approx.
10 seconds, the cooking surface automatically
switches itself off.
• If one or more sensor fields are covered by objects
(a pan, cloths, etc.) for longer than approx. 10 sec-
onds, a signal sounds and the cooking surface
switches off automatically.
• If all cooking zones are switched off, the cooking
surface automatically switches itself off after ap-
prox. 10 seconds.
Control panel
• When the appliance is switched off, if one or more
of the sensor fields on the control panel are cov-
ered for more that 10 seconds, an acoustic signal
sounds. The acoustic signal switches itself off au-
tomatically when the sensor fields are no longer
covered.
Cooking zones
• If one of the cooking zones is not switched off after
a certain time, or if the heat setting is not modified,
the relevant cooking zone switches off automati-
cally. _ is displayed. Before being used again, the
cooking zone must be set to 0.
Heat setting
V, 1 - 2
3 - 4
5
6 - 9
12
TIMER
Switches off after
6 hours
5 hours
4 hours
1.5 hours
Display
Pilot light of the cooking zone selected flashes faster
The time remaining is displayed
Acoustic signal
Acoustic signal to acknowledge.