Deactivating The Flash - Canon PowerShot ELPH 330 HS User Manual

Table of Contents

Customizing the Self-Timer

You can specify the delay (0 – 30 seconds) and number of shots (1 – 10).

Choose [$].

Following step 1 in "Using the Self-Timer"

<n> button.

Configure the setting.

Press the <o><p> buttons to choose

[Delay] or [Shots].

Press the <q><r> buttons to choose a

value, and then press the <m> button.

Once the setting is complete, [$] is

displayed.

Follow step 2 in "Using the Self-Timer"

•

For movies shot using the self-timer, [Delay] represents the delay

before recording begins, but the [Shots] setting has no effect.

•

When you specify multiple shots, image brightness and white balance are

determined by the first shot. More time is required between shots when the

flash fires or when you have specified to take many shots. Shooting will stop

automatically when the memory card becomes full.

•

When a delay longer than two seconds is specified, two seconds before the

shot, the lamp blinking and self-timer sound will speed up. (The lamp will

remain lit in case the flash fires.)

Still Images

Movies

39), choose [$] and press the

39) to shoot.