Canon PowerShot ELPH 330 HS User Manual page 116

4
Use the smartphone to connect
to the network displayed on the
camera screen.
z z Choose the displayed SSID (network
name) from the smartphone's Wi-Fi
setting menu.
z z
Enter the encryption key displayed on the
camera screen into the password field on
the smartphone.
5
Start CameraWindow on the
smartphone.
X X Once the smartphone is recognized on
the camera, the device connection screen
will be displayed on the camera.
6
Choose a smartphone to
connect to.
z z Press the <o><p> buttons to choose
the smartphone for the connection, and
then press the <m> button (=
• When you are in the vicinity of an access point that you have
previously connected to, the camera will automatically connect
to it in step 3. To change access points, select [Switch Network]
from the screen that will be displayed when the connection is
being established, and follow steps 4 – 5 in "Adding a Computer"
(= 121).
115).
• All camera images can be viewed from the connected smartphone
when you choose [Yes] in step 7. To keep camera images private,
so that they cannot be viewed from the smartphone, choose [No] in
step 7.
7
Adjust the privacy settings.
z z Press the <q><r> buttons to choose
[Yes], and then press the <m> button.
X X You can now use the smartphone to
receive images sent from the camera,
or to geotag images on the camera
(= 129).
When the smartphone has been added
X X
successfully, the image transfer screen
will be displayed. Proceed to "Sending
Images" (= 126).
Cover
Preliminary Notes and
Legal Information
Contents: Basic
Operations
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode/Hybrid
Auto Mode
3
Other Shooting
Modes
4
P Mode
5
Playback Mode
6
Wi-Fi Functions
7
Setting Menu
8
Accessories
9
Appendix
Index
116