Still Images - Canon PowerShot ELPH 330 HS User Manual

Still Images

• A flashing [ ] icon warns that images are more likely to be blurred
by camera shake. In this case, mount the camera on a tripod or take
other measures to keep it still.
• If your shots are dark despite the flash firing, move closer to the
subject. For details on the flash range, see "Flash Range"
• The subject may be too close if the camera only beeps once when
you press the shutter button halfway. For details on the focusing
range (shooting range), see "Shooting Range"
• To reduce red-eye and to assist in focusing, the lamp may be
activated when shooting in low-light conditions.
• A blinking [h] icon displayed when you attempt to shoot indicates
that shooting is not possible until the flash has finished recharging.
Shooting can resume as soon as the flash is ready, so either press
the shutter button all the way down and wait, or release it and press
it again.
•
The shutter sound will not be played when the Sleeping and Babies
(Sleeping) icons (= 36) are displayed.
• You can change how long images are displayed after shots
Movies
•
(= 172).
(= 173).
•
•
(= 52).
The camera may become warm when shooting movies repeatedly
over an extended period. This does not indicate damage.
• Keep your fingers away from the
Microphone
microphone while shooting movies.
Blocking the microphone may prevent
audio from being recorded or may
cause the recording to sound muffled.
Avoid touching camera controls other than the movie button when
shooting movies, because sounds made by the camera will be
recorded.
Audio is recorded in stereo.
Cover
Preliminary Notes and
Legal Information
Contents: Basic
Operations
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode/Hybrid
Auto Mode
3
Other Shooting
Modes
4
P Mode
5
Playback Mode
6
Wi-Fi Functions
7
Setting Menu
8
Accessories
9
Appendix
Index
35