System Installation And Recovery Process - HP ProLiant DL985 Release Note

Issue:
Cannot install DPM File Agent on Windows Storage Server 2003 (pre-R2) computers with the
Storage Manager quota feature installed
Description
Workaround For customers not currently using the features of Storage Manager (for example,

System installation and recovery process

This section describes issues related to installing the operating system on a storage server or performing
the recovery process.
Data Protection Manager
Interoperability issues between Qafilter.sys and DPM prevent DPM from being
used to protect Windows-powered Network Attached Storage (NAS) computers
using Windows Storage Server 2003 (prior to R2) that have Storage Manager
quota feature installed.
NOTE:
This issue does not apply to the ProLiant ML110 G2 Storage Server 320 GB
model with the Express edition of Windows Storage Server 2003.
Directory Quotas, File Screening, and Disk Reports) on Windows Storage Server
2003 (pre-R2) storage servers or StorageWorks NAS where the DPM File Agent
is to be installed:
Uninstall Storage Manager and all related hotfixes prior to deploying the
DPM Agent with the NAS system. Install the DPM File Agent. If required,
Storage Manager can be reinstalled using the setup file located in the
c:\hpnas\Components folder, however, the DPM File Agent must be uninstalled
before Storage Manager is installed.
For customers requiring use of Storage Manager on Windows Storage Server
2003 (pre-R2) storage servers or StorageWorks NAS where the DPM File Agent
is to be installed:
A previous version of release notes (March 2006) mentions installing Microsoft
hotfix KB896718. This does not completely fix the issue. HP and Microsoft
engineers are working to resolve this issue. HP recommends that users do not
install the DPM File Agent until a new Microsoft hotfix is released. Contact HP
support for the hotfix status, and when released, to obtain the Microsoft hotfix.
Storage Server with Windows Storage Server 2003 R2
17