Appendix; Maintenance; Oiling; Changing The Bulb - Brother LS2300PRW User Manual

4

APPENDIX

MAINTENANCE

Simple sewing machine maintenance operations are described below.

Oiling

a Turn off the machine and unplug it.
b Put 2 to 3 drops of oil at each of the points
indicated below.
Be sure to wipe any excess oil off the
machine.
c
After oiling, run the machine for a short time
at a fast speed without thread.
Memo
● Make sure to oil the machine once a week if
you use it more than an hour a day. If you
use it more often, oil every day.
● Sewing machine oil is available at your
local sewing machine dealer or service
center.
● Do not apply too much oil as it may soil the
thread and fabric.

Changing the bulb

CAUTION
● Turn off the main power switch and unplug
the machine before you change the light bulb.
If the main power switch is on when you
change the light bulb, you may get an electric
shock. If the machine is on and you step on
the foot controller, you may be injured.
● To avoid burns, let the light bulb cool down
before you change it.
a
Turn off the machine and unplug it.
b Loosen the face plate screw.
c
Remove the face plate from the machine.
Note
● Hold the face plate securely while removing
or attaching it.
4
38