Performing Remote Installations - HP e-PC c10/s10 Administrator's Manual

Performing Remote Installations

To perform a remote installation using the automatic packages, you
need a software deployment tool and correctly configured deployment
server. Also, the target client PCs must already be connected to the
LAN.
The procedure to use depends on the deployment software used. Refer
to your deployment software documentation for precise instructions.
As a rough guideline, the procedure is as follows:
1 Copy the selected software component files from the Image Library
CD to the deployment server (described in previous section).
2 Using your deployment tool, run the executable software component
files on the client PCs. The software components will be installed
remotely.
3 When you have finished installing all the required components,
reboot the client PCs remotely using your deployment tool.
4 Copying Drivers and Utilities to a Server
Performing Remote Installations
55