HP e-PC c10/s10 Administrator's Manual page 30

NOTE
2 Local Automatic Installation
How to Perform a Local Installation
6 Select the desired HP utilities and third party applications.
For more information about any component, click the component
then click
7 When you have chosen all the components you wish to install, (check
that your selection is complete) click
process.
If the Windows NT 4.0 Service Pack 6 setup file is detected, you will be
prompted to reinstall the Service Pack. A series of screens will guide you
through this process.
To install certain drivers, the PC may reboot several times before the
end of the installation process. When this is necessary, you will be
informed in the progress/status window. The installation process will
continue automatically after the reboot.
30
.
to start the installation